A Brief History of Five-Axis Gantry Type Machining Center

5 Axis Gantry Type Machining Center

A Brief History of Five-Axis Gantry Type Machining Center

Although five-axis Gantry Type Machining Center is the most commonly used by all industries, it is often times misunderstood to be the only 5-Axis Machining Center out there. The truth is that all five axes have to be taken into consideration for any kind of business or any kind of company. Here’s a brief rundown of them all:

Axis Shaft: If your purpose is to create products from scratch, an axis shaft is ideal to make this type of jobs. It is not only the easiest to operate, but the most versatile as well. It allows for the creation of complex materials, like metal jewelry, glass, and other metals.

Torque Shaft: The common term for the two types of Axis Shafts, they are: Active Torque and Non-Active Torque. Torque shafts are the type that is utilized for turning and putting pressure on its own axis. They can handle quite a bit of torque with ease.

Angle Shaft: The one whose function is to create angles by spinning its axis, these axes are very helpful in creating complex curves, whereas those that are created by the non-active axis is called angle casting. These are the easiest ones to utilize, but their operation needs care. Any major imbalance or pressure imbalance can seriously affect the overall performance of the machine. So, it is a good idea to make sure that you install only the strongest parts in your machines.

Torque Control: If your model has an active or non-active type of axis, the torque control is of great importance. This is because these are what allow you to direct the rotational force on your desired axis. But before that, you need to consider the requirement of your machine. In other words, it will determine the difference in the amount of torque you’ll be able to produce, and the overall budget that you will be charged for each axis.

A little bit more complex is the operation of the rotating cylinder, known as a Spindle Orifice. These Apertures are used to generate the right amount of rotation for the desired axis. Although these have been widely used since the time of Egyptian development, they are now being utilized more for modern purposes.

But when you want to create complicated designs or specific purposes, these axes will be able to serve you the best. They offer a wide variety of choices in terms of shapes, sizes, and materials that will serve as your engineering and design style. So, go ahead and have a look at them.

Comments have been closed/disabled for this content.